Luckfox Pico 2 Micro Development Board, Based on Raspberry Pi MCU RP2350A, Supports Dual ARM Cortex-M33 or Hazard3 RISC-V Processors
Pinheader options
Board Specifications
- Adopts RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom
- Unique dual-core and dual-architecture, equipped with dual ARM Cortex-M33 or Hazard3 RISC-V processors, with clock operating frequencies up to 150MHz
- 520KB of SRAM, and 4MB of onboard Flash memory
- Type-C connector, easier to use
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 12 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++, MicroPython, Arduino Support
Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
Dual-core & Dual-architecture
The unique dual-core & dual-architecture of RP2350A enables users to switch between a pair of industry-standard Arm Cortex-M33 cores and a pair of open hardware Hazard3 cores. This enables developers to experiment with RISC-V architecture in a stable and well supported environment
26 × multi-function GPIO Pins
configurable pin function, allows flexible development and integration
What's On Board
- LED light
user LED (not power indicator) - USB Type-C connector
- BOOT button
press it when powering on to enter download mode - DC-DC Buck-Boost chip
load current up to 2A
- RESET button
for rebooting the system - PY25Q32HB-UXH-IR
4MB NOR-Flash - RP2350A
dual-core processor, up to 150MHz operating frequency - Debug pins
outline dimensions
Pico 2
- Pico 2 × 1
1![Pico 2]()
Pico 2 M
- Pico 2 with pre-soldered header × 1
1![Pico 2 M]()
